NEWS

FREE PICK UP and DELIVERY
BEXAR COUNTY

With our commitment to uphold the highest quality standards in the plating process, along with the desire to increase service to our clients, we provide FREE pick up and delivery for orders $250 or more within Bexar County.

Pick Up and Delivery Schedule:
Monday / Tuesday / Thursday

 

Call for Pick Up
210-661-2738

Warner's Metal Finishing, Inc.

 

Color will vary from light tan to black depending on alloy and thickness. Can be dyed in darker colors depending on thickness. Coating PENETRATES base metal as much as builds up on the surface. The term THICKNESS includes both the build up and penetration. Provides very hard ceramic type coating. Abrasion resistance will vary with alloy and thickness of coating. Good dielectric properties. Corrosion resistance is good, but recommend seal hard anodize in 5% dichromate solution where increased corrosion resistance is required. Where extreme abrasion resistance is required, do not seal as some softening is encountered.

 

Specification Thickness Comments
MIL-A-8625F    
Type III As specified on drawing. If not specified nominal thickness shall be 0.002"- ±0.0004" Most aluminum alloys depending on process used. Where maximum serviceability or special properties are required, consult metal finisher for best alloy choice. Thick coatings (over .004") will tend to break down sharp edges. Typical applications: hydraulic cylinders, wear surfaces, actuating cams, etc. Can be used as an electrical insulation coating. "Flash" hard anodize may be used instead of conventional anodize for corrosion resistance and may be more economical in conjunction with other hard anodized areas.
Class 1 Non-dyed
Class 2 Dyed

 

Request a Quote 20-ft tanks available!
Contact Info

an image

Warner's Metal Finishing, Inc.

7020 FM 2538
Marion, Texas 78124

 

Phone: (210) 661-2738
Fax: (210) 649-1950

Email

Email Sign Up »